JUNIORS- EZ MECHANICAL BRAKE PEDAL
![DSC02933 - Edited.png](https://images.squarespace-cdn.com/content/v1/581961ba5016e11939006043/1669182244447-4ATLJSGJ2XRXGIK40OXI/DSC02933+-+Edited.png)
![DSC02920 - Edited.png](https://images.squarespace-cdn.com/content/v1/581961ba5016e11939006043/1669182244491-93SQCLZ99MFZDSL8GPX6/DSC02920+-+Edited.png)
![DSC02927 - Edited.png](https://images.squarespace-cdn.com/content/v1/581961ba5016e11939006043/1669182244859-KQCI9ELZPSMWW9XYKWXN/DSC02927+-+Edited.png)
![DSC02934 - Edited.png](https://images.squarespace-cdn.com/content/v1/581961ba5016e11939006043/1669182244373-E78S995SC8R5Q0AUZK69/DSC02934+-+Edited.png)
![DSC02937 - Edited.png](https://images.squarespace-cdn.com/content/v1/581961ba5016e11939006043/1669182244869-R5ZL2LYIACJJN02E8FXG/DSC02937+-+Edited.png)
JUNIORS- EZ MECHANICAL BRAKE PEDAL
-Polished 304 stainless steel for an infinitely restorable finish
-Serviceable oil impregnated bushings for smooth operation
-Hand sanded edges to insure high level or fit and finish after polishing
-CNC shaft and spool for quality control
-Internal positive and negative stop
-Enables you to fully adjust all slack out of your linkage against the negative stop for a instantly responsive pedal.
-Works with finger style mid pegs in a stock location
-Easily reachable from from you stock mid peg without having to lift your foot, just pivot your toe and engage
-Compatible with stock linkages (Some bending maybe required depending on your other parts)
-Designed for 1936-1969 Harley- Davidsons ( Also compatible with 1970- later bikes, some spacing may be required and use of early style exhaust or custom exhaust is necessary)
-For 1970 and later bikes a 1/2” minimum spacer is required so the toe peg is not hidden behind the cone.
*For fitment questions/ concerns please email juniorsmade@gmail.com or DM @juniorshandmade
1970- LATER ENGINE FITMENT NOTE:
This pedal was designed for pre 1970 generator engines, I cannot guarantee direct fitment if being used on 1970- up nose cone engines!
I have test fit on three 70s shovel heads and had clearance from hitting the cone with MINIMUM REQUIRED 1/2” spacers between the frame and pedal backing plate.
Use this info to make your own decision about purchasing, If you have fitment issues mounting, please email me or send me a DM with photos.